Probe

The probe attaches easily and securely to the end of the instrument.

Part Number: 880207

USB Cable – Tiger

Fast direct connection between the Tiger instrument range and a computer.

Part Number: 861230

Calibration Adaptor

Connects to a typical 1/4″ ID calibration pipe when calibrating using a gas flow regulator. NOTE: Not to be used with a demand flow regulator.

Part Number: 861476

Tiger XT Charge Cradle

Can charge a Tiger lithium ion battery in just 8 hours. It can charge battery packs separately or connected to the instrument.

Part Number: A-912258

Exhaust Barb

Screws into the exhaust port of the instrument allowing gas to be captured into a sample bag via typical 1/4 ID pipe.

Part Number: A-31153

Filter Clamp

Filter clamp holds the PTFE filter in place and ensures an air tight seal in conjunction with the O-ring.

Part Number: 861579

Housing Clamp

Ensures the filter clamp is held in place ensuring a leak tight seal.

Part Number: 861218

Mains Power Adaptors

For use with the charge cradle, allows direct connection with UK, US, EU and AUS power sockets.

Part Number: 1/VS-22

O-Ring (Tiger Filter Clamp)

Used to make an air tight seal ensuring all gas passes through the PTFE filter.

Part Number: 5/OV-02

Probe Seal

The probe seal sits in the filter clamp to keep it air tight.

Part Number: 880202

Tiger PTFE Filters (Pack of 10)

Used to protect the instrument from debris and water ingress.

Part Number: A-861632

Tiger XT Rechargeable Battery

Offers up to 24 hours of continuous use.

Part Number: A-861240

10.6 eV Lamp

The 10.6 eV lamp is an internal element to the ION Science PID sensor and is specifically designed for use only with ION Science PID sensors.

Part Number: LA4TM600

Lamp Spring

The lamp spring ensures the lamp stays tightly coupled with the electrode stack.

Part Number: 846600

Sensor Cover

The sensor cover is screwed to the back of the Tiger models to protect the MiniPID 2.

Part Number: A-861259

Sensor Cover Screw

The screw is used to keep the sensor cover attached to the back of the Tiger models.

Part Number: 861234

Probe

The probe attaches easily and securely to the end of the instrument.

Part Number: 880207

USB Cable – Tiger

Fast direct connection between the Tiger instrument range and a computer.

Part Number: 861230

Calibration Adaptor

Connects to a typical 1/4″ ID calibration pipe when calibrating using a gas flow regulator. NOTE: Not to be used with a demand flow regulator.

Part Number: 861476

Tiger XT Charge Cradle

Can charge a Tiger lithium ion battery in just 8 hours. It can charge battery packs separately or connected to the instrument.

Part Number: A-912258

Exhaust Barb

Screws into the exhaust port of the instrument allowing gas to be captured into a sample bag via typical 1/4 ID pipe.

Part Number: A-31153

Filter Clamp

Filter clamp holds the PTFE filter in place and ensures an air tight seal in conjunction with the O-ring.

Part Number: 861579

Housing Clamp

Ensures the filter clamp is held in place ensuring a leak tight seal.

Part Number: 861218

Mains Power Adaptors

For use with the charge cradle, allows direct connection with UK, US, EU and AUS power sockets.

Part Number: 1/VS-22

O-Ring (Tiger Filter Clamp)

Used to make an air tight seal ensuring all gas passes through the PTFE filter.

Part Number: 5/OV-02

Probe Seal

The probe seal sits in the filter clamp to keep it air tight.

Part Number: 880202

Tiger PTFE Filters (Pack of 10)

Used to protect the instrument from debris and water ingress.

Part Number: A-861632

Tiger XT Rechargeable Battery

Offers up to 24 hours of continuous use.

Part Number: A-861240

White and Gold Electrode Stack

Used for MiniPID 2 10.0 eV Sensor. Found in Tiger Select, Cub TAC and can also be used in Tiger with 10.0 eV configuration.

Part Number: A-846417

10.6 eV Lamp

The 10.6 eV lamp is an internal element to the ION Science PID sensor and is specifically designed for use only with ION Science PID sensors.

Part Number: LA4TM600

Lamp Spring

The lamp spring ensures the lamp stays tightly coupled with the electrode stack.

Part Number: 846600

Tiger XT Sensor Cover

The sensor cover is screwed to the back of the Tiger models to protect the MiniPID 2.

Part Number: A-861259

Sensor Cover Screw

The screw is used to keep the sensor cover attached to the back of the Tiger models.

Part Number: 861234

Benzene Pre-Filter Tubes

Ensures rapid detection and selective measurement of benzene and attaches to the Tiger Select via the tube holder.

Part Number: 861614

Tube Holder

Designed to hold the benzene tubes securely onto the end of the Tiger Select.

Part Number: A-880209

Benzene Tube Opener

Designed to safely break the glass tip off the benzene tube and stores it in the container.

Part Number: 5/FD-02

Probe

The probe attaches easily and securely to the end of the instrument.

Part Number: 880207

USB Cable – Tiger

Fast direct connection between the Tiger instrument range and a computer.

Part Number: 861230

Calibration Adaptor

Connects to a typical 1/4″ ID calibration pipe when calibrating using a gas flow regulator. NOTE: Not to be used with a demand flow regulator.

Part Number: 861476

Charge Cradle

Can charge a Tiger lithium ion battery in just 6.5 hours. It can charge battery packs separately or connected to the instrument.

Part Number: A-861220

Exhaust Barb

Screws into the exhaust port of the instrument allowing gas to be captured into a sample bag via typical 1/4 ID pipe.

Part Number: A-31153

Filter Clamp

Filter clamp holds the PTFE filter in place and ensures an air tight seal in conjunction with the O-ring.

Part Number: 861579

Housing Clamp

Ensures the filter clamp is held in place ensuring a leak tight seal.

Part Number: 861218

Mains Power Adaptors

For use with the charge cradle, allows direct connection with UK, US, EU and AUS power sockets.

Part Number: 1/VS-22

O-Ring (Tiger Filter Clamp)

Used to make an air tight seal ensuring all gas passes through the PTFE filter.

Part Number: 5/OV-02

Probe Seal

The probe seal sits in the filter clamp to keep it air tight.

Part Number: 880202

Tiger PTFE Filters (Pack of 10)

Used to protect the instrument from debris and water ingress.

Part Number: A-861632

Rechargeable Battery

Offers up to 24 hours of continuous use.

Part Number: A-861240

Rubber Boot

Protects your instrument from damage during general use.

Part Number: 861205

White Electrode Stack

Designed for use within the ION Science PID sensor.

Part Number: A0846267

10.6 eV Lamp

The 10.6 eV lamp is an internal element to the ION Science PID sensor and is specifically designed for use only with ION Science PID sensors.

Part Number: LA4TM600

Lamp Spring

The lamp spring ensures the lamp stays tightly coupled with the electrode stack.

Part Number: 846600

Sensor Cover

The sensor cover is screwed to the back of the Tiger models to protect the MiniPID 2.

Part Number: A-861259

Sensor Cover Screw

The screw is used to keep the sensor cover attached to the back of the Tiger models.

Part Number: 861234

Sensor Seal

The sensor seal is placed on the sensor cover of the Tiger models.

Part Number: A-861214

White Electrode Stack

Designed for use within the ION Science PID sensor.

Part Number: A-846267

Calibration Cup – Cub

Ensures calibration gas is presented to the MiniPID sensor evenly and at ambient air pressure. Allows connection to a typical 1/4.

Part Number: 871200

Docking Station

The docking station charges the Cub and Cub TAC instrument. There are three variants available: Charge Docking Station, Charge Docking Station + Data Download and Charge Docking Station + Data Download + Calibration.

PTFE Filter Membrane

PTFE filter blocks the ingress of water. The PTFE filters should be checked regularly to ensure best ongoing performance.

Part Number: 871026

Cub PID Sensor Cap

Protects the PID from damage caused by general use.

Part Number: A-871027

Cub Clip

Firmly grips a pocket, collar or belt ensuring the Cub remains attached to you.

Part Number: 2/JB-01

10.6 eV Lamp

The 10.6 eV lamp is an internal element to the ION Science PID sensor and is specifically designed for use only with ION Science PID sensors.

Part Number: LA4TM600

Lamp Spring

The lamp spring ensures the lamp stays tightly coupled with the electrode stack.

Part Number: 846600

White and Gold Electrode Stack

Used for MiniPID 2 10.0 eV Sensor. Found in Tiger Select, Cub TAC and can also be used in Tiger with 10.0 eV configuration.

Part Number: A-846417

Calibration Cup – Cub

Ensures calibration gas is presented to the MiniPID sensor evenly and at ambient air pressure. Allows connection to a typical 1/4.

Part Number: 871200

Docking Station

The docking station charges the Cub and Cub TAC instrument. There are three variants available: Charge Docking Station, Charge Docking Station + Data Download and Charge Docking Station + Data Download + Calibration.

PTFE Filter Membrane

PTFE filter blocks the ingress of water. The PTFE filters should be checked regularly to ensure best ongoing performance.

Part Number: 871026

Cub PID Sensor Cap

Protects the PID from damage caused by general use.

Part Number: A-871027

Cub Clip

Firmly grips a pocket, collar or belt ensuring the Cub remains attached to you.

Part Number: 2/JB-01

10.6 eV Lamp

The 10.6 eV lamp is an internal element to the ION Science PID sensor and is specifically designed for use only with ION Science PID sensors.

Part Number: LA4TM600

Lamp Spring

The lamp spring ensures the lamp stays tightly coupled with the electrode stack.

Part Number: 846600

Calibration Cup – Cub

Ensures calibration gas is presented to the MiniPID sensor evenly and at ambient air pressure. Allows connection to a typical 1/4.

Part Number: 871200

Docking Station

The docking station charges the Cub and Cub TAC instrument. There are three variants available: Charge Docking Station, Charge Docking Station + Data Download and Charge Docking Station + Data Download + Calibration.

PTFE Filter Membrane

PTFE filter blocks the ingress of water. The PTFE filters should be checked regularly to ensure best ongoing performance.

Part Number: 871026

Cub PID Sensor Cap

Protects the PID from damage caused by general use.

Part Number: A-871027

Cub Clip

Firmly grips a pocket, collar or belt ensuring the Cub remains attached to you.

Part Number: 2/JB-01

Lamp Spring

The lamp spring ensures the lamp stays tightly coupled with the electrode stack.

Part Number: 846600

ARA Calibration Cap

Calibration Cap used for ARA bump test and calibration.

Part Number: 908200

Falco 10.6 eV Lamp

The 10.6 eV lamp is an internal element to the ION Science PID sensor and is specifically designed for use only with ION Science PID sensors.

Part Number: LA4SFL3.2

Fitted Barb

Fitted to the side of the Falco / Falco TAC Pumped instruments.

Part Number: 5/JHS-14

Lamp Spring

The lamp spring ensures the lamp stays tightly coupled with the electrode stack.

Part Number: 846600

Falco 10.6 eV Lamp

The 10.6 eV lamp is an internal element to the ION Science PID sensor and is specifically designed for use only with ION Science PID sensors.

Part Number: LA4SFL3.2

Sensor Cover – Falco Diffused Models

Used to protect the MiniPID 2.

Part Number: 873206

Calibration Adaptor – Falco

Connects directly to the sensor housing of Falco Diffused.

Part Number: 873201

Lamp Spring

The lamp spring ensures the lamp stays tightly coupled with the electrode stack.

Part Number: 846600

Battery Holder

Accepts 4 x AA size batteries and connects to the instrument via a clip.

Part Number: 1-BH-01

Battery Holder

Accepts 4 x AA size batteries and connects to the instrument via a clip.

Part Number: 1-BH-01

Calibration Magnet

Used to adjust parameters and is needed throughout the calibration routine.

Part Number: A-849219

Calibration Adaptor

Alternative sensor housing allowing the TVOC 2 to be bump tested from a remote location.

Part Number: 849217

Flow Adaptor Cap

Alternative sensor housing used to integrate the TVOC 2 into a pumped system. NOTE: Maximum pressure 300 mBar. Recommended flow 250 to 500 ml/min.

Part Number: 900209

Lamp Spring

The lamp spring ensures the lamp stays tightly coupled with the electrode stack.

Part Number: 846600

Carbon Filter

The carbon filter removes VOC gases from ambient air allowing instruments to be zero’d.

Part Number: A-31057

Red Electrode Stack

Designed for use for the ION Science PID sensor within Titan.

Part Number: A-846444

Carbon Filter Assembly (with connectors)

Filters the gas sample.

Part Number: A-875505

Carbon Filter Assembly (without connectors)

Filters the gas sample.

Part Number: A-875409

Detector Module Kit

This kit provides a spare detector module and number of accessories.

Part Number: TSMXSXXXX-X

MiniPID 2 6-Pin Long Life Lamp 10.6 eV (Red)

Sensor designed for the Titan instrument.

Part Number: M6SX6SXU2

Lamp Spring

The lamp spring ensures the lamp stays tightly coupled with the electrode stack.

Part Number: 846600

Blue Electrode Stack

GasClam 2 electrode stack for VOC sensor.

Part Number: A-846745

Carbon Dioxide 0 – 100 % Sensor

Used within GasClam 2.

Part Number: 1/EO-03

Carbon Dioxide 0 – 100 % Sensor

Used within GasClam 2.

Part Number: 1/EO-05

Charger NiMH ECH 1.1

Battery charger for GasClam 2 batteries.

Part Number: 25062

Lamp Spring

The lamp spring ensures the lamp stays tightly coupled with the electrode stack.

Part Number: 846600