PID Response Check Pen

The pen provides simple, quick reassurance that your detector is responding to the presence of VOCs prior to use.

4/QM-01

10.6 eV Lamp

The 10.6 eV lamp is an internal element to the ION Science PID sensor and is specifically designed for use only with ION Science PID sensors.

LA4TM600.

PID Lamp Cleaning Kit

Used to clean the lamp within the MiniPID sensor to remove dirt, grease and grime from the lap window ensuring optimal performance.

A-31063

Stack Removal Tool

Allows safe, easy removal of the stack from the PID sensor.

846216

PID Response Check Pen

The pen provides simple, quick reassurance that your detector is responding to the presence of VOCs prior to use.

4/QM-01

10.6 eV Lamp

The 10.6 eV lamp is an internal element to the ION Science PID sensor and is specifically designed for use only with ION Science PID sensors.

LA4TM600.

PID Lamp Cleaning Kit

Used to clean the lamp within the MiniPID sensor to remove dirt, grease and grime from the lap window ensuring optimal performance.

A-31063

Stack Removal Tool

Allows safe, easy removal of the stack from the PID sensor.

846216

PID Response Check Pen

The pen provides simple, quick reassurance that your detector is responding to the presence of VOCs prior to use.

4/QM-01

PID Lamp Cleaning Kit

Used to clean the lamp within the MiniPID sensor to remove dirt, grease and grime from the lap window ensuring optimal performance.

A-31063

Stack Removal Tool

Allows safe, easy removal of the stack from the PID sensor.

846216

Falco Fixed Flow Regulator

The Fixed Flow Regulator provides a constant flow of gas. Used for Falco and Falco TAC Diffused.

Part Number: 5/RP-04

Falco PID Removal Tool

Allows safe, easy removal of the Falco PID sensor.

Part Number: 873250

PID Response Check Pen

The pen provides simple, quick reassurance that your detector is responding to the presence of VOCs prior to use.

Part Number: 4/QM-01

PID Lamp Cleaning Kit

Used to clean the lamp within the MiniPID sensor to remove dirt, grease and grime from the lap window ensuring optimal performance.

Part Number: A-31063

Stack Removal Tool

Allows safe, easy removal of the stack from the PID sensor.

Part Number: 846216

Falco PID Removal Tool

Allows safe, easy removal of the Falco PID sensor.

Part Number: 873250

PID Response Check Pen

The pen provides simple, quick reassurance that your detector is responding to the presence of VOCs prior to use.

Part Number: 4/QM-01

PID Lamp Cleaning Kit

Used to clean the lamp within the MiniPID sensor to remove dirt, grease and grime from the lap window ensuring optimal performance.

Part Number: A-31063

Stack Removal Tool

Allows safe, easy removal of the stack from the PID sensor.

Part Number: 846216

PID Response Check Pen

The pen provides simple, quick reassurance that your detector is responding to the presence of VOCs prior to use.

Part Number: 4/QM-01

Lanyard

The lanyard can prevent you from accidentally dropping your Tiger range instrument as it will be tethered to your wrist.

Part Number: 861235

5m Extension Probe

Used for hard to reach areas such as confined spaces.

Part Number: A-861413

10m Extension Probe

Used for hard to reach areas such as confined spaces.

Part Number: A-861414

Holster and Belt

Ideal for when you are working at heights and climbing.

Part Number: 861266

Calibration Gas 100 ppm isobutylene 34 L

A 100 ppm isobutylene gas cylinder for accurate calibration and verification of instrument performance.

Part Number: 8616655

Stack Removal Tool

Allows safe, easy removal of the stack from the PID sensor.

Part Number: 846216

PID Lamp Cleaning Kit

Used to clean the lamp within the MiniPID sensor to remove dirt, grease and grime from the lap window ensuring optimal performance.

Part Number: A-31063

CalCheck

Provides self-calibration in cc/sec leak rates of ION Science leak detectors.

Contact [email protected] for a quote.

CalCheck

Provides self-calibration in cc/sec leak rates of ION Science leak detectors.

Contact [email protected] for a quote.

PID Lamp Cleaning Kit

Used to clean the lamp within the MiniPID sensor to remove dirt, grease and grime from the lap window ensuring optimal performance.

Part Number: A-31063

Stack Removal Tool

Allows safe, easy removal of the stack from the PID sensor.

Part Number: 846216

Data Logger

Has 4 x 12 bit input channel and accepts 0-2.5, 0-5 and 0-10 Vdc signal inputs.

Part Number: A-869204

USB Bluetooth Dongle Class 1

The Bluetooth Dongle allows you to connect Panther PRO to your laptop (only necessary if your laptop doesn’t have bluetooth connectivity).

Part Number: 4/IB-01

CalCheck

Provides self-calibration in cc/sec.

Part Number: A-21500

Box Spanner

If you damage the instrument probe, use the box spanner to replace.

Part Number: 4/TB-01

20 cm Flexi Probe

The flexi probe can be attached to the top of your Panther instrument providing you with access to hard to reach spaces.

Part Number: A-907227

Power Supply 5VDC 1.20A 6W USB – Multi Head

This power supply has multiple head attachments for global use.

Part Number: 1/VS-32

Threaded Spout

The threaded spout is used to protect the capillary probe.

Part Number: 907263

USB Cable A to USB C

You can use this cable to connect to ION PC or charge your instrument.

Part Number: 1/VC-27

Probe Sleeve (Pack of 5)

The probe sleeve is used to protect the capillary probe.

Part Number: A-907289

PID Response Check Pen

The pen provides simple, quick reassurance that your detector is responding to the presence of VOCs prior to use.

Part Number: 4/QM-01

Lanyard

The lanyard can prevent you from accidentally dropping your Tiger range instrument as it will be tethered to your wrist.

Part Number: 861235

5m Extension Probe

Used for hard to reach areas such as confined spaces.

Part Number: A-861413

10m Extension Probe

Used for hard to reach areas such as confined spaces.

Part Number: A-861414

10.6 eV lamp

The 10.6 eV lamp is an internal element to the ION Science PID sensor and is specifically designed for use only with ION Science PID sensors.

Part Number: LA4TM600

Calibration Gas 100 ppm isobutylene 34 L

A 100 ppm isobutylene gas cylinder for accurate calibration and verification of instrument performance.

Part Number: 8616655

Car Charger Lead

This car charger lead plugs into the Tigers charge cradle allowing the instrument to be charged from a standard 12Vdc cigar/cigarette lighter socket.

Part Number: 1/jawu-01

Charger Support Strap

The charger support strap can hold the Tiger instrument against the charge cradle. It is useful if charging within a moving vehicle.

Part Number: 861245

Demand Flow Regulator

The demand flow regulator draws gas when demanded by an instrument. Used for Cub, Tiger, Tiger LT, Tiger Select & Falco Pumped.

Part Number: 5/RD-01

Flexi Probe 1m

The 1m flexi probe enables greater flexibility for the detection of VOCs in hard to reach places.

Part Number: 861642

PID Calibration Kit 100 ppm Isobutylene 103 Litres

This gas is used to calibrate Tiger, Tiger LT, Tiger Select and Cub.

Part Number: A-845213

PID Lamp Cleaning Kit

Used to clean the lamp within the MiniPID sensor to remove dirt, grease and grime from the lap window ensuring optimal performance.

Part Number: A-31063

Stack Removal Tool

Allows safe, easy removal of the stack from the PID sensor.

Part Number: 846216

Flexi Probe

The flexi probe enables greater flexibility for the detection of VOCs in hard to reach places.

Part Number: A-861406

PID Response Check Pen

The pen provides simple, quick reassurance that your detector is responding to the presence of VOCs prior to use.

Part Number: 4/QM-01

Lanyard

The lanyard can prevent you from accidentally dropping your Tiger range instrument as it will be tethered to your wrist.

Part Number: 861235

5m Extension Probe

Used for hard to reach areas such as confined spaces.

Part Number: A-861413

10m Extension Probe

Used for hard to reach areas such as confined spaces.

Part Number: A-861414

10.6 eV lamp

The 10.6 eV lamp is an internal element to the ION Science PID sensor and is specifically designed for use only with ION Science PID sensors.

Part Number: LA4TM600

Calibration Gas 100 ppm isobutylene 34 L

A 100 ppm isobutylene gas cylinder for accurate calibration and verification of instrument performance.

Part Number: 8616655

Car Charger Lead

This car charger lead plugs into the Tigers charge cradle allowing the instrument to be charged from a standard 12Vdc cigar/cigarette lighter socket.

Part Number: 1/jawu-01

Charger Support Strap

The charger support strap can hold the Tiger instrument against the charge cradle. It is useful if charging within a moving vehicle.

Part Number: 861245

Demand Flow Regulator

The demand flow regulator draws gas when demanded by an instrument. Used for Cub, Tiger, Tiger LT, Tiger Select & Falco Pumped.

Part Number: 5/RD-01

Flexi Probe 1m

The 1m flexi probe enables greater flexibility for the detection of VOCs in hard to reach places.

Part Number: 861642

PID Calibration Kit 100 ppm Isobutylene 103 Litres

This gas is used to calibrate Tiger, Tiger LT, Tiger Select and Cub.

Part Number: A-845213

PID Lamp Cleaning Kit

Used to clean the lamp within the MiniPID sensor to remove dirt, grease and grime from the lap window ensuring optimal performance.

Part Number: A-31063

Stack Removal Tool

Allows safe, easy removal of the stack from the PID sensor.

Part Number: 846216

Flexi Probe

The flexi probe enables greater flexibility for the detection of VOCs in hard to reach places.

Part Number: A-861406

PID Response Check Pen

The pen provides simple, quick reassurance that your detector is responding to the presence of VOCs prior to use.

Part Number: 4/QM-01

Lanyard

The lanyard can prevent you from accidentally dropping your Tiger range instrument as it will be tethered to your wrist.

Part Number: 861235

5m Extension Probe

Used for hard to reach areas such as confined spaces.

Part Number: A-861413

10m Extension Probe

Used for hard to reach areas such as confined spaces.

Part Number: A-861414

10.6 eV lamp

The 10.6 eV lamp is an internal element to the ION Science PID sensor and is specifically designed for use only with ION Science PID sensors.

Part Number: LA4TM600

Calibration Gas 100 ppm isobutylene 34 L

A 100 ppm isobutylene gas cylinder for accurate calibration and verification of instrument performance.

Part Number: 8616655

Car Charger Lead

This car charger lead plugs into the Tigers charge cradle allowing the instrument to be charged from a standard 12Vdc cigar/cigarette lighter socket.

Part Number: 1/jawu-01

Charger Support Strap

The charger support strap can hold the Tiger instrument against the charge cradle. It is useful if charging within a moving vehicle.

Part Number: 861245

Demand Flow Regulator

The demand flow regulator draws gas when demanded by an instrument. Used for Cub, Tiger, Tiger LT, Tiger Select & Falco Pumped.

Part Number: 5/RD-01

Flexi Probe 1m

The 1m flexi probe enables greater flexibility for the detection of VOCs in hard to reach places.

Part Number: 861642

PID Calibration Kit 100 ppm Isobutylene 103 Litres

This gas is used to calibrate Tiger, Tiger LT, Tiger Select and Cub.

Part Number: A-845213

Stack Removal Tool

Allows safe, easy removal of the stack from the PID sensor.

Part Number: 846216

Flexi Probe

The flexi probe enables greater flexibility for the detection of VOCs in hard to reach places.

Part Number: A-861406

Fixed Flow Regulator

The Fixed Flow Regulator provides a constant flow of gas. Used for Titan.

Part Number: 5/RP-04

Accessory Kit – Titan

The accessory kit includes: connector 9-way, connector 5-way, L-wrench (2mm, 2.5mm, 3mm), actuation magnetic.

Part Number: A-875522

PID Lamp Cleaning Kit

Used to clean the lamp within the MiniPID sensor to remove dirt, grease and grime from the lap window ensuring optimal performance.

Part Number: A-31063

Stack Removal Tool

Allows safe, easy removal of the stack from the PID sensor.

Part Number: 846216

PID Lamp Cleaning Kit

Used to clean the lamp within the MiniPID sensor to remove dirt, grease and grime from the lap window ensuring optimal performance.

Part Number: A-31063

Stack Removal Tool

Allows safe, easy removal of the stack from the PID sensor.

Part Number: 846216